Open 24/7, weekends & holidays
IDA Certified Residential & Commercial
Garage Door Panel & Window Replacement in MD
Fast Service. Fair Pricing. Great Warranty.
- Same-day service available
- A firm price before any work begins
- Fixed in one trip with fully stocked trucks
- Maryland licensed, MHIC #138235
Prefer to text? Text us at (410) 600-1031
Dented or cracked panel?
Free estimate
Call us, or text us photos, and we will give you a price before any work begins.
- No charge and no obligation
- Photos by text are enough to start
- A firm price before any work begins
Garage door panel replacement: can you replace one section?
Often, yes. Garage door panel replacement means swapping one damaged section (the horizontal piece that runs the full width of the door) for a new one made by the same manufacturer for your door’s model, size and color. ADP Garage Door Repair replaces sections and windows on Clopay, Amarr, Wayne Dalton and other doors across Central Maryland. Estimates are free: text us photos of the door and its label, and we tell you whether a section can still be ordered.
Most garage door panel replacement jobs start with a car backing into the door, a dented bottom section, or a cracked window. A replacement section is not a generic part: it has to match the manufacturer, model, size and color of the door, and it is ordered from the manufacturer. When it is no longer made, a new door is the fix. This page explains how to tell which you need, how to find your door’s model, and how window replacement works.
- 160+ section and panel replacement jobs since June 2020
- Free estimate: text photos of the door and its label
Counts come from our own Housecall Pro job records (June 2020 to November 2026).
Replace a garage door panel or buy a new door?
A section can usually be replaced when
- The damage is limited to one or two sections. Clopay says replacement is likely a feasible option in that case.
- Your model is still made. Clopay supplies replacement sections for its steel and wood doors provided it still manufactures your model, and Amarr says one section can be replaced on most doors if the model is still in production and is not a custom design.
- The door is not a custom carriage house design. Clopay notes that certain custom designs, such as Coachman, Canyon Ridge and Gallery Steel styles, can make replacement harder.
A new door makes more sense when
- The door is over 15 years old (Clopay’s rule of thumb) or the model is discontinued, so a matching section cannot be ordered.
- Several sections are dented, rusted or cracked. Clopay says patchwork repairs on widespread damage add up without bringing back the door’s strength or look.
- The damage reaches the door’s frame, or the door lacks the insulation and safety features you want.
When a section can no longer be ordered, see garage door installation and the brands we install; estimates for new doors are free.
Can a dented garage door panel be repaired?
Clopay says a small, shallow dent near the middle of a panel can sometimes be smoothed out, but a large or creased dent, or one near an edge or seam, can weaken the panel and affect how the door opens, closes and seals. Then the section should be replaced.
Will a new section match my door?
The new section is made in the same design and factory color, but Amarr and Clopay both note that a door’s color changes over time with sun and weather, so a new section may not match an older door exactly, especially a painted or stained one.
From Clopay’s “Can I Replace My Garage Door Panels?”, “Should I Repair or Replace a Dented Garage Door?” and Garage Door FAQ (clopaydoor.com), and Amarr’s residential door FAQ (amarr.com), checked November 2026.
How to find your garage door’s model number
To order a replacement section, the manufacturer needs the door’s model, the size of the section, the color, and which section it is: top, middle or bottom. The model is on a label or sticker on the inside of the door.
| Manufacturer | Where to look |
|---|---|
| Clopay | A label on the inside of the door, often along the edge of a section or near the bottom panel. It lists the model number, serial number and manufacturing date. On doors made in the last ten years, a 15 or 16 digit serial number is on the inside of the bottom section; the serial number is the easiest way to identify the model. |
| Wayne Dalton | Stickers on the inside of the door. Wayne Dalton says its wind load sticker usually lists the manufacturer’s name, the model number and the design pressures. The panel design (for example Sonoma, Colonial or Ranch) and color also decide which section fits. |
| Amarr | Your purchase papers show the Amarr model name and number (for example LI2000 or CL3000). Photograph any labels on the inside of the door too. |
| Any brand | Clopay notes that under the 2021 International Residential Code every garage door sold in the United States must carry a permanent label with the manufacturer and the model or series number. Older doors may have no readable label; photos and measurements still let us identify most of them. |
What to text us for a free estimate
- A photo of the whole door from outside, and a close photo of the damage.
- Photos of every label or sticker on the inside of the door, including the bottom section.
- The door’s width and height, and how many sections it has.
- A photo of the windows, if the damaged section has them.
We tell you whether the section can still be ordered and what it costs, or whether a new door is the better buy.
From Clopay’s garage door parts page, “Can I Replace My Garage Door Panels?” and “Wind Insurance & Garage Doors” (clopaydoor.com) and Wayne Dalton’s wind load page (wayne-dalton.com), checked November 2026. Amarr does not publish a label location we could check.
Garage door window replacement and window inserts
A cracked window does not mean a new door. Clopay says its dealers can supply replacement windows or, when needed, whole sections.
Garage door window inserts
On Clopay steel doors, decorative inserts snap in and out of the window frame and can sit on the inside or the outside of the glass. Each insert has tabs on the ends of its legs; it is removed by pulling the center firmly out of the window and put back by pressing the four tabs under the lip of the frame. Clopay says not to remove the screws from the window frame. Broken or faded inserts can be replaced without replacing the glass.
Cracked or loose glass
Do not run a door with loose or cracked glass. Clopay’s manual says not to operate the door if the glass or the inside window retainer is loose, cracked or warped, and not to remove the screws on the inside retainer: the glass can fall out. It also warns that the steel edge behind a removed frame can be sharp. If you have not replaced garage door glass before, leave it to us.
Window parts are covered by the door maker’s warranty for a set time: Clopay covers window components such as frames, grilles, inserts and clear acrylic for 10 years on its steel doors, and Amarr covers DecraGlass, DecraTrim inserts and frames for 10 years (single pane glass is not covered). Clean windows with mild dish soap and a soft cloth; no ammonia, abrasive or solvent cleaners on acrylic.

From Clopay’s steel door Care and Maintenance manual and its replacement parts guide (clopaydoor.com) and Amarr’s residential limited warranty (amarr.com), checked November 2026.
How garage door section replacement works
- Photos or a visit. From your photos and the label we identify the manufacturer, model, size, design and color, and which section is damaged.
- Firm price. We check that the section is still made and give you a firm price before ordering.
- Order. The section is ordered from the manufacturer for your exact door.
- Make the door safe in the meantime. If the door is off track or will not close, we put it back on track and make it safe while the section is on order.
- Install. We remove the damaged section, move over or replace its hinges, rollers and brackets, install the new section, and check the springs, cables and track.
- Test. We check the door’s balance, run it by hand and with the opener, and test the safety sensors and reversal.
Not a DIY job. Clopay strongly recommends that a professional replace door sections: they are heavy, and the springs hold the door under high tension. The bottom section carries the bottom brackets, which hold the lift cables. Wayne Dalton and Amarr warn never to remove or loosen the bottom brackets or anything fastened to the springs, and Amarr warns against adding parts to a door because the springs are sized for the door as it left the factory.
From Clopay’s Garage Door FAQ and “Can I Replace My Garage Door Panels?” (clopaydoor.com), Wayne Dalton installation manual 341459 (wayne-dalton.com) and Amarr’s owner’s manual (amarr.com), checked November 2026.
How much does garage door panel replacement cost in Maryland?
It depends on the manufacturer, model, width, insulation, color, windows and which section is damaged, so we price each door individually. The estimate is free: text us the photos listed above, or call. You get a firm price before anything is ordered.
- If the door also came off its track, our Off-Track Re-Set starts at $149. See garage door off track repair.
- If a new door is the better choice, the estimate for the new door is free too.
- We offer military and senior discounts, and financing with a quick prequalification.
Garage door panel questions
Can I buy a panel from another brand that looks the same?
No. Each manufacturer makes sections for its own models. The replacement has to come from your door’s manufacturer and match its model, size, design and color.
Why is the bottom section different?
It carries the bottom weather seal and the bottom corner brackets, which hold the lift cables under spring tension; Wayne Dalton marks those brackets with warning labels. Replacing a bottom section always means working on the cables, so it is never a DIY job.
My door was hit by a car. Is it safe to use?
Not until it has been checked. A hit often bends the track, pops rollers out or damages a cable as well as the section. Leave the door where it is and call us.
Can you replace a section on a commercial door?
Yes, on commercial sectional doors when the section is still available from the manufacturer. See commercial garage door repair; commercial estimates are free.
Garage door panel replacement in Maryland
Call ADP Garage Door Repair or text us photos of your door and its label for a free estimate on a replacement section, a garage door window or window inserts anywhere in Central Maryland. We are open 24/7 including weekends and holidays, and you get a firm price before any work begins. Brand details: Clopay, Amarr, Wayne Dalton. If a section is no longer made, see new garage door installation and our residential garage door repair.
What our customers say
Rated 5.0 stars from 1,266 Google reviews
We offer financing
Prefer to pay over time rather than all at once? Prequalify for financing today.
*All financing is subject to credit approval. Your terms may vary. Payment options through Wisetack are provided by our lending partners. For example, a $5,500 purchase could cost $253.54 per month for 24 months, based on a 9.9% APR, or $1,833.33 per month for 3 months, based on a 0% APR. Offers range from 0 to 35.9% APR based on amount requested and creditworthiness. Not all merchants and lending partners participate in 0% interest programs. Terms range from 3 - 120 months and may vary based on merchant, lending partner, or transaction size. State interest rate caps may apply. No prepaid finance charges or participation fees. See additional terms at wisetack.com/faqs.











