Wayne Dalton Garage Doors in Maryland

Wayne Dalton, a division of Overhead Door Corporation, makes residential garage doors in steel, wood, fiberglass, vinyl and aluminum and glass, plus commercial sectional, rolling and high speed doors. Many of its doors use Wayne Dalton’s own TorqueMaster spring system, with the springs sealed inside a steel tube. ADP Garage Door Repair is an authorized Wayne Dalton dealer in Central Maryland: we install Wayne Dalton doors, replace damaged panels and sections, and convert TorqueMaster spring systems to standard torsion springs.

• 10+ Wayne Dalton jobs completed since June 2020
• 4 Wayne Dalton jobs in the last 24 months
• R 16.22 insulation of the Classic Steel Model 8500, a 2 inch thick steel door

Counts come from our own Housecall Pro job records. Product facts on this page are from Wayne Dalton’s website (wayne-dalton.com), its installation manuals and warranty documents, checked November 2026.

The Wayne Dalton work on our invoices

• TorqueMaster to torsion conversions. Our most common Wayne Dalton job: replacing a TorqueMaster spring system with standard torsion springs.
• Panels and sections. We replace damaged Wayne Dalton panels and sections, including T150S sections.
• New doors. We have installed and serviced a Wayne Dalton 9100 in the Sonoma design (vertical short panels).
• Commercial high speed doors. We have installed and serviced a Wayne Dalton ADV-X Model 888, a high speed metal door for commercial buildings.

TorqueMaster is Wayne Dalton’s own counterbalance system: the springs sit inside a steel tube above the door instead of on an open shaft. When a TorqueMaster spring breaks or the system stops balancing the door, ADP converts it to a standard torsion spring system sized for the door’s weight. It is the Wayne Dalton job we do most.

What Wayne Dalton says about TorqueMaster Plus

• The springs are contained inside a steel tube, which Wayne Dalton says helps prevent injury from an accidental release of spring tension.
• It has an anti-drop safety device: if a spring breaks while the door is up, the device stops the door from free falling.
• Wayne Dalton says the system is designed to exceed industry minimum spring cycle standards by an average of 15%, and that its optional 25,000 cycle spring gives more than twice the life of a standard torsion spring.
• Wayne Dalton’s pages name TorqueMaster Plus as the spring system on Models 8000, 8200, 8310, 8670, 8680, 8700, 9100, 9405 and 9605.

Signs the TorqueMaster safety system has engaged

Wayne Dalton’s warning tag says that when the TorqueMaster Plus safety feature engages, the door can still be opened, makes a distinct clicking noise, and may not close. On a single spring system, an opener can sometimes still lift the door while the lift cables hang slack. Wayne Dalton says to avoid running the opener once the system has engaged, so you do not damage the door, and to contact a door dealer for the repair.

What a conversion involves

We remove the TorqueMaster tube and fit a standard torsion system: springs on a steel shaft above the door, matched to your door’s weight and height. Your door sections stay. Before any work begins you get a firm price, and the $45 service call is waived when we do the repair. More on garage door spring repair.

From Wayne Dalton’s TorqueMaster Plus page, product pages and the Model 9100, 9405, 9600 installation manual (wayne-dalton.com), checked November 2026.

Wayne Dalton names its residential doors by model number. Most of the steel doors are Classic Steel; the panel designs have names of their own, such as Colonial, Ranch and Sonoma on the entry level doors. These are the current models and the insulation Wayne Dalton lists for each:

From Wayne Dalton’s product pages (wayne-dalton.com), checked November 2026. Wayne Dalton uses a calculated door section R-value; U-factors are from independent testing per ANSI/DASMA 105, and actual performance varies with door size. For the 9100 and 9605, Wayne Dalton lists R 9 for the 9100 and R 10 for the 9605, and also R 9 for 7 foot tall and R 10 for 8 foot tall doors. The AG versions are all glass, and the U-factor does not apply to them.

Wood, aluminum and glass

• Wood: the Model 100 and 300 series (the Model 100 is colonial style), the Model 40 series flush doors, the 7100 wood panel doors, the 7400 carriage house doors and custom wood doors. The 7400 is about 2 inches thick with four layer construction, in woods such as hemlock, cedar and mahogany, with optional insulation up to R 4.75.
• Aluminum and glass: Models 8800 and 8850, the wind load rated 8855, and the 8450 Luminous frameless glass door. The 8800 offers clear, tinted, satin etched or laminated glass, and optional insulated Low-E glass up to R 4.36.

How to choose

• For an attached or heated garage: an insulated door such as the 8300 (R 12.12) or 8500 (R 16.22). Wayne Dalton notes that its foamed-in-place polyurethane also adds strength and makes the door quieter. Read more about insulated garage doors.
• For a detached garage or a tight budget: the entry level 8000, or the 8200 with polystyrene insulation.
• For the look of a carriage house or wood: the 9405, 8600 or 8670 in steel, the 8680 in fiberglass, or the 7400 in real wood.
• For a modern home: the 8350 flush metallic door or the 8800 and 8850 aluminum and glass doors.

We give free estimates for new doors: call, or text us photos of your garage. See garage door installation and financing.

A dented or cracked Wayne Dalton section can be replaced on its own when a matching section is still made for your model, panel design and color. ADP replaces Wayne Dalton panels and sections, including T150S sections, and installs complete new doors when a match is no longer made.

• Send us photos of the whole door, the damaged section, and any stickers or labels on the inside of the door. The model number, panel design (for example Sonoma, Colonial or Ranch) and color decide which section fits.
• Older models. Wayne Dalton retired the Classic Steel Model 9600 and replaced it with the Model 9605 in 2017. For older models a matching section is not always available.
• The bottom section carries the bottom corner brackets, which hold the lift cables under spring tension. Wayne Dalton’s manuals say never to remove, adjust or loosen the bolts on the bottom corner brackets or the spring system: leave that to us.

See residential garage door repair for the other repairs we do.

Model 9605 announcement: Wayne Dalton news page (wayne-dalton.com/about/news). Bracket warning: Wayne Dalton installation manual 341459. Checked November 2026.

• Sectional doors: aluminum full view doors for places like restaurants and car dealerships, insulated Thermospan and ThermoMark doors, and non insulated steel doors, including high strength warehouse doors.
• Rolling doors: rolling service doors, fire doors, rolling grilles, counter shutters, security shutters, roll up sheet doors for self storage, and rolling storm shelter doors.
• High speed doors: two high speed metal doors for exterior openings (Models 888 and 889 ADV-Xtreme), six high speed fabric doors for interior and exterior use, and one high speed rubber door for extreme environments. Wayne Dalton’s high speed doors have a springless design.

Wayne Dalton Model 888 ADV-X high speed metal door

We have installed and serviced a Model 888. Wayne Dalton’s specifications:

From Wayne Dalton’s commercial door pages and the Model 888 product page (wayne-dalton.com), checked November 2026.

See commercial garage door repair and high speed doors.

Wayne Dalton’s polyurethane insulated steel doors, including the 9100, 9605, 8300 and 8500, carry a Limited Lifetime Warranty for as long as the original buyer owns the home. The entry level 8000 and 8200 carry 10 years. Wayne Dalton says warranty claims go through an authorized Wayne Dalton dealer.

What the 9100 and 9605 Limited Lifetime Warranty covers

• Lifetime: peeling, cracking or chalking of the factory coating on the steel sections; rust through from the core or failure of the foam insulation that makes the door inoperable; and the hardware and tracks, except the springs.
• 5 years: peeling or fading of paint finishes that cleaning will not fix.
• 1 year: all other parts.
• Wayne Dalton repairs or replaces the defective part; labor is not covered. The warranty is for the original buyer only, is not transferable, and does not cover commercial buildings, misuse, lack of maintenance or unauthorized repairs.

From Wayne Dalton’s product pages, its FAQ page and the Models 9100 and 9605 Limited Warranty (rev. 09/2024), wayne-dalton.com, checked November 2026. Read the warranty document for your model before you file a claim.

From the operation and maintenance section of Wayne Dalton’s installation manual:

• Look the door over every month for worn or broken parts, check that it moves freely, and test your opener’s safety features (the reversal and the photo eye sensors) as the opener manual describes.
• Check the balance. With the door fully closed and the opener released, lift the door by its handles. If it rises by itself or is hard to lift, the springs need adjusting: call a technician, do not adjust them yourself.
• Lubricate the steel hinges, steel rollers, bearings and spring coils with a non silicone lubricant. Do not lubricate plastic idler bearings, nylon rollers or the track.
• Clean a steel door with one cup of mild detergent (under 0.5% phosphate) in five gallons of warm water and a soft cloth. Wayne Dalton says never to use a pressure washer, bleach, or solvent based or window cleaners.
• Do not hang anything from the horizontal tracks, and never stand or walk under a moving door.

From Wayne Dalton’s installation manual 341459 and its garage door FAQ (wayne-dalton.com), checked November 2026.

Call us for a TorqueMaster to torsion conversion, a broken spring, a damaged panel or section, a new Wayne Dalton door, or a Wayne Dalton commercial door or high speed door. We are open 24/7, including weekends and holidays, across Central Maryland. You get a firm price before any work begins, and the $45 service call is waived when we do the repair. New doors get a free estimate. See all the brands we install.